6
TH52002C-TH53003E-TH56002A
Instruction & User Manual
GUARANTEE
This item is covered by our three-year
Quality Guarantee. In the unlikely event that
it develops a fault within this period, we will
replace it.
OPERATING
INSTRUCTIONS
TO SUPPORT VEHICLE
1. Pull the upper column out from the lower
column.
2. Insert the locating pin through the holes in
both upper and lower columns.
3. Secure the locating pin by inserting the clip
pin into it.
4. Carefully position the jack stands so that
the load will contact the centre of the top
saddle.
5. Always use jack stands in pairs and only
on those parts of the vehicle which can
support the load. Please consult the
vehicle owner’s manual for the lift and
support points.
NOTE
The stands must only be positioned on a hard
level surface when operational. The rated load
of 2/3/6 Tonnes (TH52002C / TH53003E/
TH56002A) per pair must not be exceeded
under any circumstances. Centre load on the
top saddle. Use as a matched pair to support
one end of a vehicle only.
TO LOWER LOAD
1. Raise vehicle clear of stands.
2. Carefully lower the stands to lowest
position.
3. Remove stands then carefully lower
vehicle to the ground.
4. Ensure that all tools, equipment, and
personnel are clear of the vehicle before
lowering the load.
All dimensions are approximate. Images for
illustration purposes only.
