01 - Machine
03 - Safety
12 - Maintenance Safety
01 - 10
9806/4300-5
01 - 10
12 - Maintenance Safety
Introduction
Hot Components
Touching hot surfaces can burn skin. The engine and
machine components will be hot after the unit has
been running. Allow the engine and components to
cool before servicing the unit.
Turning the Engine
Do not try to turn the engine by pulling the fan or fan
belt. This could cause injury or premature component
failure.
Notice:
The engine and other components could
be damaged by high pressure washing systems.
Special precautions must be taken if the machine is
to be washed using a high pressure system. Make
sure that the alternator, starter motor and any other
electrical components are shielded and not directly
cleaned by the high pressure cleaning system. Do
not aim the water jet directly at bearings, oil seals or
the engine air induction system.
WARNING!
To bleed the injectors you must turn the
engine. When the engine is turning, there are parts
rotating in the engine compartment. Before starting
this job make sure that you have no loose clothing
(cuffs, ties etc) which could get caught in rotating
parts. When the engine is turning, keep clear of
rotating parts.
Notice:
Clean the engine before you start
engine maintenance. Obey the correct procedures.
Contamination of the fuel system will cause damage
and possible failure of the engine.
Notice:
Do not exceed the maximum level of engine
oil in the sump. If the maximum is exceeded, the
excess must be drained to the correct level. An
excess of engine oil could cause the engine speed
to increase rapidly without control.
WARNING!
The engine has exposed rotating parts.
Switch off the engine before working in the engine
compartment. Do not use the machine with the
engine cover open.
WARNING!
Hot oil and engine components can burn
you. Make sure the engine is cool before doing
this job. Used engine crankcase lubricants contain
harmful contaminants. In laboratory tests it was
shown that used engine oils can cause skin cancer.
Notice:
A drive belt that is loose can cause damage
to itself and/or other engine parts.
WARNING!
Do not open the high pressure fuel
system with the engine running. Engine operation
causes high fuel pressure. High pressure fuel spray
can cause serious injury or death.
CAUTION!
It is illegal to pollute drains, sewers
or the ground. Clean up all spilt fluids and/or
lubricants. Used fluids and/or lubricants, filters and
contaminated materials must be disposed of in
accordance with local regulations. Use authorised
waste disposal sites.
Содержание T4F 444
