jcb JZ140 ZT Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 41

background image

Section 2 - Care and Safety

Safety Check List

Operating Safety

2 - 4

9803-6530

2 - 4

Operating Safety

!M

WARNING

Practice

You or others can be killed or seriously injured if you
do unfamiliar operations without first practising them.
Practise away from the work site on a clear area. Keep
other people away. Do not perform new operations
until you are sure you can do them safely.

INT-2-1-1

!M

WARNING

Machine Condition

A defective machine can injure you or others. Do not
operate a machine which is defective or has missing
parts. Make sure the maintenance procedures in this
handbook are completed before using the machine

INT-2-1-2

!M

CAUTION

If you have an attachment which is not covered in this
handbook do not install it, use it or remove it until you
have obtained, read and understood the pertinent
information. Install attachments only on the machines
for which they were designed.

5-5-1-1

!M

WARNING

Entering/Leaving

Entering or leaving the cab or canopy must only be
made where steps and handrails are provided. Always
face the machine when entering and leaving. Make
sure the step(s), handrails and your boot soles are
clean and dry. Do not jump from the machine. Do not
use the machine controls as handholds, use the
handrails.

INT-2-1-7_1

!M

WARNING

Controls

You or others can be killed or seriously injured if you
operate the control levers from outside the cab.
Operate the control levers only when you are correctly
seated inside the cab.

INT-2-1-3

!M

WARNING

Visibility

Accidents can be caused by working in poor visibility.
Use your lights to improve visibility. Keep the road
lights, windows and mirrors clean.

Do not operate the machine if you cannot see clearly.

5-1-4-7

!M

WARNING

Machine Limits

Operating the machine beyond its design limits can
damage the machine, it can also be dangerous. Do not
operate the machine outside its limits. Do not try to
upgrade the machine performance with unapproved
modifications.

INT-2-1-4

!M

WARNING

Exhaust Gases

Breathing the machine exhaust gases can harm and
possibly kill you. Do not operate the machine in closed
spaces without making sure there is good ventilation.
If possible, fit an exhaust extension. If you begin to feel
drowsy, stop the machine at once. Get out of the cab
into fresh air.

INT-2-1-10

!M

DANGER

Sparks

Explosions and fire can be caused by sparks from the
exhaust or the electrical system. Do not use the
machine in closed areas where there is flammable
material, vapour or dust.

INT-2-2-10

!M

WARNING

Engine

The engine has exposed rotating parts. Do not open
the engine cover while the engine is running. Do not
use the machine with the cover open.

INT-2-1-6_1

Find manuals at http://best-manuals.com/search?&s=JCB-9803-6530-1

«
...
34
35
36
37
38
...
»

Содержание JZ140 ZT










































Отзывы:

Нет отзывов

Похожие инструкции для JZ140 ZT

Marchesan RTA 6

Бренд: TATU Страницы: 46

Бренд: FlexLink Страницы: 74

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды