JCB, SO53 3LE
www.jcb-tools.com
Customer Helpline 0333 0143092
2. REMOVE THE SANDING
PAPER
A) MESH SANDING SHEET (WITH
HOOK & LOOP SYSTEM)
Simply remove the mesh sanding
sheet directly.
B) SANDING PAPER WITHOUT
HOOK & LOOP SYSTEM
To remove the sanding paper, lift
up the clamp lever and move away
from the clamp lever lock. The
sanding paper clamp is now loose.
Repeat with the other clamp on the
opposite side of your sander.
3. PAPER PUNCH
If using sanding paper without
dust holes, use the paper punch
to perforate the holes to ensure
correct dust extraction. Position the
punch (7) over the base plate with
the punch sides on the edges of the
base plate. Press the punch into the
base plate to punch holes into the
sanding paper. Then remove the
punch and check all the holes have
been formed correctly.
OPERATION
1. ON /OFF SWITCH
Depress to start and release to stop
your tool.
2. SWITCH LOCK-ON
BUTTON
Depress on/off switch (1) then lock-
