Release the battery cover latch and open as per diagram 1
OPERATION
- USING 18V POWER TOOL BATTERIES
Insert the correct connector for the battery you are going to use and clip in place as
per diagram 2 below
Slide the 18V battery onto the connector until it clicks in place as per diagram 3
Close the battery cover and lock in place with the latch as per diagram 4 as below
If you wish to remove the battery cover press together the 2 plastic tabs on the inside
of the cover which locate the hinge pins and take the cover off
Reverse the above to re-attach the cover when required
Version: 2.0/0923
Version: 2.0/0923
