![background image](http://html1.mh-extra.com/html/jcb/jcb-ms-254sb/jcb-ms-254sb_instructions-and-users-manual_3586612009.webp)
9
JCB-MS-254SB
Instruction & User Manual
Safety instructions for the
handling of saw blades
removing the cut-off piece.
1
Only use insertion tools if you have mas-
tered their use.
2
Observe the maximum speed. The maxi-
mum speed specified on the insertion tool
may not be exceeded. If specified, observe
the speed range.
3
Observe the motor / saw blade direction
of rotation.
4
Do not use any insertion tools with cracks.
Sort out cracked insertion tools. Repairs are
not permitted.
5
Clean grease, oil and water off of the clamp-
ing surfaces.
6
Do not use any loose reducing rings or
bushes for the reducing of holes on saw
blades.
7
Make sure that fixed reducer rings for se-
curing the insertion tool have the same di-
ameter and have at least 1/3 of the cutting
diameter.
8
Make sure that fixed reducer rings are par-
allel to each other.
9
Handle insertion tool with caution. They
are ideally stored in the originally package or
special containers. Wear protective gloves
in order to improve grip and to further re-
duce the risk of injury.
10
Prior to the use of insertion tools, make
sure that all protective devices are properly
fastened.
11
Prior to use, make sure that the insertion
tool meets the technical requirements of
this electric tool and is properly fastened.
12
Only use the supplied saw blade for cutting
wood, never for the processing of metals.
This electric tool generates an
electromagnetic field during operation. This
field can impair active or passive medical
implants under certain conditions. In order to
prevent the risk of serious or deadly injuries,
we recommend that persons with medical
implants consult with their physician and the
manufacturer of the medical implant prior to
operating the electric tool.
WARNING!
–
Reaching with your hand near the
coasting blade is dangerous.
–
The braking action of the saw may cause
the saw head to be suddenly pulled
downward, causing a risk of injury.
19
Hold the handle firmly when making
an incomplete cut or when releasing
the switch before the saw head is
completely in the down position.
Содержание JCB-MS-254SB
