6
JCB-FLH40
Instruction Manual
SAFETY NOTICE
ELECTRICAL
WARNING!
It is the user’s responsibility to read, understand and comply with the
following electrical instructions:
Ensure the risk of electrical shock is minimised by the installation of appropriate safety
devices
Use only the supplied mains charger plug for connecting the worklight to the mains power
supply.
Inspect the charger plug, AC card, cable and connection for wear and damage to ensure
the items are safe before connecting to the mains power supply
DO NOT use if worn or damaged
Check cables are always protected against short circuit and overload
IMPORTANT!
Check that the voltage marked on the charger plug is the same as the
power supply to be used
Uncoil the cable between charger and the worklight
DO NOT use any other type of charger with this product
DO NOT place the connector into any area of the worklight except the correct inlet
socket
DO NOT try to take the charger plug apart
DO NOT use the charger plug to charger or power any other electrical items
DO NOT wet the charger or AC plug or use in wet or damp conditions (indoor use only)
