JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092
2. Longer life and better
performance can be obtained if
the battery pack is charged when
the air temperature is between 18
O
C and 24
O
C. Do not charge the
battery pack in air temperatures
below 4.5
O
C, or above 40.5
O
C.
This is important as it can prevent
serious damage to the battery
pack.
3. Never freeze your charger or
immerse charger in water or any
other liquid.
4. When the battery pack fails to
produce sufficient power on jobs
that were previously done easily,
please recharge you battery, do
not continue to use under this
condition. You may charge a
partially used pack whenever you
desire with no adverse affect on
the battery pack.
5. When charging it is normal that
the charger and battery pack may
become warm to touch.
6. If the battery pack does not
charge properly:
a. Check current at power outlet
by plugging in another appliance.
b. Plug and unplug to check
whether the charger is ok
c. Check whether the battery has
been damaged
d. Move the charger and battery
pack to a location where the
surrounding air temperature is
approximately 18
O
C -24
O
C.
e. If the charging problem persists,
take the tool, battery pack and
charger to an authorized service
center.
f. Under certain conditions, when
the charger is plugged into
the power supply, the exposed
charging contacts inside the
charger can be shorted by foreign
material. Foreign materials of a
conductive nature such as metallic
particles should be kept away from
charger cavities. Always unplug
the charger from the power supply
when there is no battery pack in
the charger or before attempting to
clean.
4. TO REMOVE OR
INSTALL BATTERY PACK
Locate latches on side of battery
pack and depress both sides to
release battery pack from your
tool. Remove battery pack from
your tool. After recharge insert the
battery pack into the battery port.
A simple push and slight pressure
will be sufficient.