SO53 3LE
Customer Helpline 0845 600 5526 Monday to Friday 09.00 to 17.00
www.JCBdiy.com
1 l
+ 20 ml =
2 l
+ 40 ml =
3 l + 60 ml = 50:1 (2%)
4 l + 80 ml =
5 l + 100 ml =
Mix the fuel thoroughly each time before fueling.
Mix in small quantities. Do not mix quantities more than the amount to use in a
30-day period. Synthetic 2-stroke oil containing a fuel stabilizer is recommended.
TO FILL THE TANK
1. Clean surface around the fuel cap to prevent contamination.
2. Loosen the fuel cap slowly to release pressure and to keep the fuel from spilling
around the cap.
3. Carefully pour the fuel mixture into the tank. Do not spill.
4. Prior to replacing the fuel cap, clean and inspect the gasket.
5. Immediately replace and tighten the fuel cap. Wipe up any fuel spillage. Move 9 m
away from the refueling site before starting the engine.
Note:
It is normal for smoke to emit from a new engine during and after first use.
WARNING
Always shut off the engine before fueling. Never add fuel to a machine with a running
or hot engine. Move at least 9 m from the refueling site before starting the engine.
Do not smoke!
STARTING AND STOPPING ENGINE
See Figure 4.
WARNING
Never start or run the engine inside a closed or poorly ventilated area; breathing
exhaust fumes can kill.
Note:
Before starting the unit, make sure:
the On/Off switch is in “I” position;
the trimmer is lying on a flat and bare surface.
JCB-BC26_960443002-01_Manual_final.indd A12
JCB-BC26_960443002-01_Manual_final.indd A12
12/2/2010 5:38:01 PM
12/2/2010 5:38:01 PM
