18
JCB-20JS
Instruction & User Manual
m
Clear the power tool vents and the blade
mount of dust and dirt after each use.
Do not clean ventilation holes by
inserting sharp objects in them, such
as screwdrivers and other similar
objects.
m
Stubborn contamination in areas hard to
access can be removed with compressed air
(max. 3 bar).
m
Regularly check all fasteners, screws and
bolts to make sure that they are tight.
Tighten any loose screws immediately or
serious injury could occur.
Never open the power tool. The power
tool has no internal parts that the user can
service or repair. Never try to repair the
power tool yourself. Take to an authorised
service centre.
WARNING!
Transport and Storage
m
If the power tool will remain unused for any
length of time, it should be stored in the
original packaging.
m
Store the power tool and battery in a dry,
frost-free, well ventilated place.
m
Keep all tools out of the reach of children.
m
Always switch off the power tool and
disconnect it from the power supply
(remove the battery/unplug the power
cord) before transport.
m
Always carry the power tool using the
purpose-designed handle.
m
Ensure that the power tool is not at risk
of tipping over or exposed to excessive
vibration and shocks during transport,
especially if the tool will be transported by
car or other vehicle.
Operating temperature: 0-40 °C
Storage temperature: 20-60 °C
NOTE
