background image

7

JCB-18CS
Instruction & User Manual

 

m

Wear ear protectors.

 Exposure to noise 

can cause hearing loss.

 

m

Wear eye protection.

 Wear goggles 

to prevent eyes from exposure to flying 
particles.

 

m

Wear dust mask.

 Take protective 

measures against inhalation of dust. Some 
materials can contain toxic materials. Also 
work with dust/ chip extraction when 
connectable.

Additional Safety Rules For Saw 
Tools

 

m

Keep hands away from cutting area 
and the blade. Keep your second 
hand on auxiliary handle, or motor 
housing.

 If both hands are holding the saw, 

they cannot be cut by the blade.

 

m

Do not reach underneath the 
workpiece. 

The guard cannot protect you 

from the blade below the workpiece.

 

m

Adjust the cutting depth to the 
thickness of the workpiece. 

Less than a 

full tooth of the blade teeth should be visible 
below the workpiece.

 

m

Never hold the workpiece in your 
hands or across your leg while 
cutting. Secure the workpiece to a 
stable platform.

 It is important to support 

the work properly to minimise body 
exposure, blade binding, or loss of control.

 

m

Hold the power tool by insulated 
gripping surfaces, when performing 
an operation where the cutting tool 
may contact hidden wiring or its own 
cord. 

Contact with a “live” wire will also 

make exposed metal parts of the power 
tool “live” and could give the operator an 
electric shock.

 

m

When ripping, always use a rip fence 
or straight edge guide.

 This improves 

the accuracy of cut and reduces the chance 
of blade binding.

 

m

Always use blades with correct size 
and shape (diamond versus round) of 
arbour holes. 

Blades that do not match 

the mounting hardware of the saw will run 
off-centre, causing loss of control.

 

m

Never use damaged or incorrect 
blade washers or bolt. 

The blade 

washers and bolt were specially designed 
for your saw, for optimum performance and 
safety of operation.

Kickback Causes And Related 
Warnings

 

m

Kickback is a sudden reaction to a pinched, 
jammed or misaligned saw blade, causing 
an uncontrolled saw to lift up and out of the 
workpiece toward the operator

 

m

When the blade is pinched or jammed 
tightly by the kerf closing down, the blade 
stalls and the motor reaction drives the unit 
rapidly back toward the operator

TOOL SPECIFIC SAFETY WARNINGS

Cutting Procedures

Содержание JCB-18CS
























Отзывы: