Section 1 - General Information
Service Tools
Section F
1-32
1-32
9813/3850-1
Fig 63. 892/01094 Transmission Jack
When removing the Powershift gearbox use of a special transmission jack is strongly recommended. This jack can also
be used when removing Synchro Shuttle gearboxes.
Note: The jack must be used with special support plates. Manufacture the plates locally, refer to Figs 64,65 and 66.
Rear Jack Plate - 4 and 6 speed Powershift - Manufacture locally from 5 mm thick mild steel plate.
Fig 64.
A402680
A706940-C1