About the Product
Description
8
9831/5000-2
8
Description
General
The JCB Loadall is a self propelled, seated operator, wheeled machine for operation on unimproved natural
terrain and disturbed terrain.
A main structural support is designed to carry an extending boom with a carriage mounted on the front to which
forks or an approved attachment can be fitted.
When used normally the machine lifts and places loads by extending/retracting, raising/lowering the boom.
Intended Use
The machine is intended to be used in normal conditions for the applications described in this manual. If the
machine is used for other applications or in dangerous environments, for example in a flammable atmosphere
or in areas with dust containing asbestos, special safety regulations must be obeyed and the machine must
be equipped for use in these environments.
Make sure you follow the instructions outlined in the operator’s manual of the mounted or trailed machinery
or trailer. Do not operate the combination tractor-machine or tractor-trailer unless all instructions have been
followed.
Log Moving/Object Handling
Do not use the machine to move or handle logs unless sufficient log protection is installed. You could cause
serious injury to yourself and damage to the machine. For more information, contact your JCB dealer.
Optional Equipment and Attachments
A wide range of optional attachments are available to increase the versatility of your machine. Only the JCB
approved attachments are recommended for use with your machine. Contact your JCB dealer for the full list
of approved attachments available.
Danger Zone
The danger zone is any zone within and/or around the machinery in which a person is subject to a risk to their
health or safety. The danger zone includes the area in immediate proximity to any hazardous moving parts,
areas into which working equipment and attachments can be moved to quickly, the machine normal stopping
distances and also areas into which the machine can quickly turn under normal conditions of use. Depending
on the application at the time, the danger zone could also include the area into which debris, from use of an
attachment or working tool, could be projected and any area into which debris could fall from the machine.
During the operation of the machine, keep all persons out of the danger zone. Persons in the danger zone
could be injured.
Before you do a maintenance task, make the product safe, stopping operation, isolating the controls and turning
off the engine.
