jcb 5.5-21 ROTO, Быстрый старт

Страница: 14 / 32

14 Please see operator manual for full details.
Load Management Screen
Service Speed
The service speed menu allows the operator to activate and edit different speed profiles. There are 5
profiles, the first (Profile 1) is the default and all speeds are set to 100%. The other four are editable to
give increased controllability or productivity in certain applications. To activate a profile use the rotary
controller to scroll to the relevant profile and click it, at this point the circular icon will illuminate. To
edit a profile, navigate to the needed profile and press and hold the rotary controller. Then individually
select and edit the different services to a point where you are happy. To change between the active
profiles, use button B on the joystick shown below. The active profile will show in the top right of the
screen. An example, if you were to set a profile for winch work, may look like this:
Lift: 100% Lower: 100% Crowd: 0%
Dump: 0% Extend: 100% Retract: 100%
Slew: 50% Aux A: 50% Aux B: 100%
The LH joystick has a push button function to override the speed profile set temporarily (whilst the
button is held). This will sound an alarm and show a red speed profile symbol on the top bar of the
load management display.
B
C
D
A
B