jcb 409ZX, Руководство по эксплуатации и ремонту

Страница: 23 / 31

22
JCB
409ZX Loader
1 2 1 2
3 4 3 4
5 5
BACK
Settings Page 1
NEXT
STARTUP
OPTIONS
DOOR
WINDOW
SETTING
PRESSURE
SETPOINT
CHECK
RUNTIME
DATE /
TIME
CO2
SETTING
8:30 22/04/23 25%
Cabin Pressure 50Pa
CO2 Level 200 PPM
Temperature 20 °C
BACK
Settings
SYSTEM
CHECK
VIEW GRAPH
EVENT LOG
SITE ACCESS
MENU
BACK Pressure Settings
PRESSURE UNITS = Pascals
Alarm Set
Point
Pressure Set
Point
Pressure
Alarm Delay
20 50 5 mins
8:30 22/04/23 25%
Cabin Pressure 50Pa
CO2 Level 200 PPM
Temperature 20 °C
BACK Enter Pin
1 2 3
4 5 6
7597 7 8 9
CLEAR
0
ENTER
BACK
Enter Pin
1 2 3
4 5 6
7597 7 8 9
CLEAR
0
ENTER
BACK Settings
SYSTEM
CHECK
VIEW GRAPH
EVENT LOG
SITE ACCESS
MENU
BACK
Settings Page 1
NEXT
STARTUP
OPTIONS
DOOR
WINDOW
SETTING
PRESSURE
SETPOINT
CHECK
RUNTIME
DATE /
TIME
CO2
SETTING
BACK
Pressure Settings
PRESSURE UNITS = Pascals
Alarm Set
Point
Pressure Set
Point
Pressure
Alarm Delay
20 50 5 mins
PRESSURE SETPOINT
The pressure setpoint changes the pressure that the cabin will be maintained.
INPRESS TS maintains the pre-set pressure within the cabin compared to outside.
Enter Setup mode and select ADJUST SETPOINT button. Then, use the onscreen UP
and DOWN buttons to change the corresponding fields.
PRESSURE ALARM SETTING
The mining industry benchmark for cabin pressure is 50 pascals and low-pressure is
set at 20 pascals.
After a delay the alarm will activate if cabin pressure remains below the pre-set
value. Enter Setup mode and select ADJUST SETPOINT button. Then, use the
onscreen UP and DOWN buttons to change the corresponding fields.
USER SETTINGS INSTRUCTIONS