![background image](http://html1.mh-extra.com/html/jcb/2cx/2cx_service-manual_3615847027.webp)
4 - 3
Maintenance Safety (cont'd)
!
!
WARNING
Hydraulic Hoses
Damaged hoses can cause fatal accidents. Inspect the
hoses regularly for:
-
Damaged end fittings
-
Chafed outer covers
-
Ballooned outer covers
-
Kinked or crushed hoses
-
Embedded armouring in outer covers
-
Displaced end fittings.
INT-3-3-2
!
!
WARNING
To avoid burning, wear protective gloves when handling hot
components. To protect your eyes, wear goggles when
using a wire brush to clean components.
HYD 1-3
!
!
WARNING
A raised and badly supported machine can fall on you.
Position the machine on a firm, level surface before raising
one end. Ensure the other end is securely chocked. Do not
rely solely on the machine hydraulics or jacks to support the
machine when working under it.
Disconnect the battery, to prevent the engine being started
while you are beneath the machine.
GEN-1-1
!
!
WARNING
Make the machine safe before working underneath it. Park
the machine on level ground, lower the arms. Apply the
parking brake, put the transmission in neutral and stop the
engine. Chock both sides of all four wheels.
Disconnect the battery, to prevent the engine being started
while you are beneath the machine.
GEN-1-2
!
!
WARNING
JCB Extradig Dipper Lubricant
JCB Extradig dipper lubricant contains 1.53% lead. The
repeated swallowing of very small quantities can cause
chronic lead poisoning. Do not smoke or touch food while
handling this lubricant. Dispose of waste (rags etc.) in
accordance with local regulations.
2-1-1-8
!
!
WARNING
Waxoyl contains turpentine substitute, which is flammable.
Keep flames away when applying Waxoyl. Waxoyl can take
a few weeks to dry completely. Keep flames away during the
drying period.
Do not weld near the affected area during the drying period.
Take the same precautions as for oil to keep Waxoyl off your
skin. Do not breathe the fumes. Apply in a well-ventilated
area.
5-3-1-
9
!
!
WARNING
Fluoroelastomeric Materials
Certain seals and gaskets (e.g. crankshaft oil seal) on JCB
machines contain fluoroelastomeric materials such as Viton,
Fluorel and Technoflon. Fluoroelastomeric materials
subjected to high temperatures can produce highly corrosive
hydrofluoric acid. THIS ACID CAN SEVERELY BURN.
New fluoroelastomeric components at ambient temperature
require no special safety precautions.
Used fluoroelastomeric components whose temperatures
have not exceeded 300°C require no special safety
precautions. If evidence of decomposition (e.g. charring) is
found, refer to the next paragraph for safety instructions. DO
NOT TOUCH COMPONENT OR SURROUNDING AREA.
Used fluoroelastomeric components subjected to
temperatures greater than 300°C (e.g. engine fire) must be
treated using the following safety procedure. Make sure that
heavy duty gloves and special safety glasses are worn:
1
Ensure that components have cooled then remove and
place material into plastic bags.
2
Thoroughly wash contaminated area with 10% calcium
hydroxide or other suitable alkali solution, if necessary
use wire wool to remove burnt remains.
3
Thoroughly wash contaminated area with detergent and
water.
4
Contain all removed material, gloves etc. used in this
operation in sealed plastic bags and dispose of in
accordance with Local Authority Regulations.
DO NOT BURN FLUOROELASTOMERIC MATERIALS.
If contamination of skin or eyes occurs, wash affected area
with a continuous supply of clean water or with calcium
hydroxide solution for 15-60 minutes. Get medical attention
immediately.
INT-3-3-5/1
Section 2
Care & Safety
9803/7110
Section 2
4 - 3
Issue 1
Содержание 2CX
Страница 29: ...5 2 Safety Decals cont d 2CX Section 2 Care Safety 9803 7110 Section 2 5 2 Issue 3 S198220...
Страница 30: ...5 3 Safety Decals cont d 210S Section 2 Care Safety 9803 7110 Section 2 5 3 Issue 1 187740 1...
Страница 31: ...This as a preview PDF file from best manuals com Download full PDF manual at best manuals com...