jcb 135 Скачать руководство пользователя страница 40

Страница: 40 / 51

03 - Attachments and Options

00 - General

03 - 4

9813/6750-1

03 - 4

Health and Safety

Attachments

Use only the JCB approved attachments that are

specified for your machine. Operating with non-

specified attachments can overload the machine,

causing possible damage and machine instability

which could result in injury to yourself or others.
The use of non-approved attachments could

invalidate your warranty.

Attachments

If you have an attachment which is not covered in the

Operator's Manual do not install it, use it or remove

it until you have obtained, read and understood the

pertinent information. Install attachments only on the

machines for which they were designed.

WARNING!

Load and unload on firm, level ground.

Always be alert for possible hazards. Take special

care when turning or reversing.

DANGER!

Before lowering the attachments to the

ground, make sure that the machine and the area

around it are clear of other people. Anyone on or

close to the machine could fall and be crushed by the

attachments, or get caught in the linkages.

DANGER!

Using the forks alone as a working

platform is hazardous; you can fall off and be killed

or injured. Never use the forks as a working platform.

Содержание 135




















































Результаты поиска

Содержание 135

Отзывы:

Похожие инструкции для 135

Бренды по названию

Популярные бренды

jcb 135, Руководство по обслуживанию

Результаты поиска

Содержание 135

Отзывы:

Похожие инструкции для 135

Бренды по названию

Популярные бренды