jcb 135 HD, Руководство по обслуживанию

Страница: 22 / 51

01 - Machine
03 - Safety
27 - Maintenance Positions
01 - 16 9813/4450-2 01 - 16
Figure 8.
Figure 9. Stowed Position
B
D
B Locking pin
D
Cab/canopy maintenance strut
Figure 10. Support Position
D
B
B Locking pin
D Cab/canopy maintenance strut
Operation Position
1. Make sure the area between the cab/canopy and
the chassis is clear before you lower the cab/
canopy.
2. Fold the cab/canopy maintenance strut back into
the stowed position and fix in place with pin from
a safe position
3. Lower the cab/canopy by slowly pushing on the
front steel tubes of the cab/canopy frame. Do
not push on the front glass if installed. The glass
could break.
4. Install the two rear mounting nuts and
compression plates to secure the cab/canopy.
Torque tighten to
Torque: 205N·m
The compression plate is critical for ROPS (Roll-Over
Protective Structure) integrity. Only replace with the
correct JCB approved part.
Never operate the machine with the cab/canopy in
the raised position. Always secure the cab/canopy
using the rear mounting nuts and compression
plates tightened to the correct torque. If they
are not installed the cab/canopy could tip forward
unexpectedly.