Installation
JC-MR-2836-LED USER MANUAL
3
1. Remove the package carefully, do not lose the screws.
2. Using a level, mark off a horizontal line, and ensure that the ends of the
brackets are spaced to the width between the inner edges of the vertical
aluminium extrusions (see illustration 1). mark off the holes using a pencil.
3. Note: Screws supplied are only suitable for stud walls. For drywall walls use
special wall fasteners available from DIY or hardware stores. Seek advice
from a specialist about the suitability of screws to be used. Drill the required
holes and insert wall screws.
4. Measure the distance between hanging holes by using provided screws.
5. Before making any electrical connections it is necessary to turn off the main
electricity supply. This unit is provided with a supply cable arleady fitted.
This cable should be fitted to the household by lighting circuit ot to a fused
3 AMP supply. Connections should be made in accordance with the latest
regulations. This cabinet is manufactured to CLASS 1 and requires an earth
connection.
OPERATING INSTRUCTIONS
INSTALLATION INSTRUCTIONS:
The next step is to make the electrical connection from the mirror to the main sup-
ply. Use the connection wire found at the rear of the mirror to make the necessary
connections. A second person will need to hold the mirror in place while electrical
connections are made.
Strip wires to a suitable
length. DO NOT connect
to a plug & socket outlet.
THIS PRODUCT IS MANUFACTURED TO CLASS I
CATEGORY AND MUST HAVE AN EARTH CONNECTION.
! IF IN DOUBT CONSULT YOUR ELECTRICIAN !
COLOUR CODING:
L - Live = Black
N - Neutral = White
- Earth = Green
ILLUSTRATION 1
PORTRAIT OR LANDSCAPE
PREPARATION
Mains Supply
110V AC
L
N
Short touch for changing color
Keep touching three seconds for dimming