7
c
Parallel Wiring Mode:
Powering subwoofers in parallel mode with one subwoofer per amplifier channel provides optimum flexibility for im-
plementing cardioid subwoofer configurations and Electronic Delay Steering (EDS) as well as an optimum 4-ohm load
for power amplifier channels. This wiring method allows for greater design and control flexibility since each VTX enclo-
sure is connected to its own amplifier and DSP channel. Parallel wiring also makes testing easier since each subwoofer
can be tested independently.
In this configuration a breakout cable or a rack I/O panel is necessary to wire the two subwoofer transducers to one
amplifier channel. These adapter cables are easy to construct out of stock connectors and cables. The pin configuration
is provided later in this document.
JBL Professional
has partnered with cable manufacturer
Link
to offer these adapter cables as finished goods that can
be ordered internationally directly from
Link.
Below are the part numbers for the products and to purchase, please
contact Link at:
LK VTX-NL-424
For use with 2 Channel Itech HD amplifiers
NL4-1
NL4-2
LK VTX-NL-844
For use with 4 Channel Itech HD amplifier
NL4-1
NL4-2
NL4-3
NL4-4
Female NL4
Female NL8
Содержание VTX Series
Страница 1: ...VTX Subwoofer Wiring Guide...
