manualshive.com logo in svg

JBL Synthesis SDP-5, Руководство пользователя

Поделиться
Скачать
JBL Synthesis SDP-5 Скачать руководство пользователя страница 120

Option/

Default

Possible

Parameter

Setting

Settings

RE-EQUALIZER

ON

ON, OFF

SURROUND EX

AUTO

AUTO, ON, OFF

COMPRESSION

OFF

AUTO, ON, OFF

LFE MIX

+0.0dB

-10.0 to +0.0dB

OUTPUT LEVELS

CUSTOM

Listening mode menu option and parameter descriptions begin on page 5-28.

The table below indicates the conditions in which THX
Surround EX and THX Ultra2 decoding are engaged.

•

THX Surround EX decoding is engaged when the SURROUND
EX parameter is set to ON, or the SURROUND EX parameter is
set to AUTO and a flagged 5.1-channel Dolby Digital source
with THX Surround EX encoding is detected.

•

THX Ultra2 decoding is engaged when the SURROUND EX
parameter is set to OFF, or the SURROUND EX parameter is set
to AUTO and a non-flagged 5.1-channel Dolby Digital source
with or without THX Surround EX encoding is detected.

MODE ADJUST

SDP-5

5-17

5.1-Channel Surround EX-Encoded

Dolby Digital (Non-Flagged)

5.1-Channel Surround EX-Encoded

Dolby Digital (Flagged)

5.1-Channel

Dolby Digital

5.1 THX ULTRA2

5.1 THX SurEX

5.1 THX ULTRA2

SURROUND EX: AUTO

5.1 THX SurEX

5.1 THX SurEX

5.1 THX SurEX

SURROUND EX: ON

5.1 THX ULTRA2

5.1 THX ULTRA2

5.1 THX ULTRA2

SURROUND EX: OFF

Parameter
Setting

Input

Source

•

Listening mode name differs depending on the encoding
present in the input source, the SURROUND EX parameter
setting, and the speaker setup.

–

The 5.1 THX ULTRA2 listening mode is available when THX
Ultra2 decoding is engaged.

–

The 5.1 THX SurEX listening mode is available when THX
Surround EX decoding is engaged.

–

The 5.1 THX listening mode is available when neither THX
Ultra2 nor Surround EX decoding is engaged.

–

The 5.1 THX ULTRA2 and 5.1 THX SurEX listening modes
cannot be activated unless side and rear speakers are
present.

Note:

The SDP-5 cannot automatically detect THX
Surround EX encoding in non-flagged 5.1-channel
Dolby Digital sources. A non-flagged source does not
include information in the input signal that identifies
THX Surround EX encoding.

Содержание Synthesis SDP-5
































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды