JBL Synthesis SCL-2 Скачать руководство пользователя страница 12

Страница: 12 / 13

Please visit JBLSYNTHESIS.COM for additional language support on the user manual.

Veuillez visiter JBLSYNTHESIS.COM pour obtenir le mode d'emploi en d'autres langues.

Para obter o manual do usuário em outros idiomas, acesse JBLSYNTHESIS.COM

Ga naar JBLSYNTHESIS.COM voor de handleiding in andere talen.

Gå til JBLSYNTHESIS.COM for bruksanvisning på flere språk.

Если вам требуется дополнительные версии руководства пользователя на других языках, посетите сайт

JBLSYNTHESIS.COM.

別の言語に対応したユーザーマニュアルを読むには、JBL SYNTHESIS.COMにアクセスしてください。

사용자 설명서에 대한 추가 언어 지원은 JBLSYNTHESIS.COM에서 확인하십시오

请访问 JBLSYNTHESIS.COM 以获取其他语言版本的用户手册。

Visita JBLSYNTHESIS.COM para obtener el manual de usuario de soporte en idiomas adicionales.

Weitere Sprachfassungen der Bedienungsanleitung findest Du unter JBLSYNTHESIS.COM.

Si prega di visitare JBLSYNTHESIS.COM per i manuali di istruzioni in altre lingue.

Jos tarvitset ylimääräistä kieleen liittyvää tukea käyttöohjeesta, käy osoitteessa JBLSYNTHESIS.COM.

Gå ind på JBLSYNTHESIS.COM for at se betjeningsvejledningen på flere sprog.

Gå till JBLSYNTHESIS.COM för mer information om språk i användarmanualen.

SPECIFICATIONS

SCL-2

Speaker Type:

2½-way in-wall loudspeaker

Low Frequency Transducer:

Three 8" (200mm) cast-frame, Advanced Aluminum Matrix cone woofers

High Frequency Transducer:

D2415K, 1.5" (38mm), dual annular ring Teonex

diaphragm compression driver

mounted to Sonoglass

horn/baffle

Maximum Recommended Amplifier Power:

445 Watts RMS (CEA-426B specification, calculated onto the SCL-2

rated load impedance)

Frequency Response (-6dB on-axis):

Coverage Area(-6dB @ 20KHz):

Coverage Area (-6dB @10KHz):

57Hz – 25kHz

80 x 70 Degrees (Hor x Vert)

100 x 100 Degrees (Hor x Vert)

Sensitivity (2.83V@1m):

92dB

Nominal Impedance:

6 Ohm

Crossover Frequency:

225Hz; 1.3kHz

Enclosure type:

Sealed in-wall mount with included back box

Inputs:

Dual gold-plated binding posts

Finished Dimensions With Grille (H X W X D):

40.2" x 12.8" x 6.13” (1020.8mm x 325.5mm x 155.6mm)

Cutout Dimensions With Back Box (H X W):

38.25" x 11.5" (971.6mm x 292.1mm)

Mounting Depth With Backbox:

5.82” (147.8mm)

Weight:

53.5 lb (24.3 kg)

Finishes:

Matte Black with white paintable grille

Содержание Synthesis SCL-2














Результаты поиска

Содержание Synthesis SCL-2

Отзывы:

Бренды по названию

Популярные бренды

JBL Synthesis SCL-2, Руководство пользователя

Результаты поиска

Содержание Synthesis SCL-2

Отзывы:

Бренды по названию

Популярные бренды