JBL SYNTHESIS SAM2LF, Руководство для владельца и установщика

Страница: 13 / 16

I
NPUT
/O
UTPUT
A
SSIGNMENTS WITH
P
ASSIVE
C
ROSSOVER
The SDEC-3000 supports up to 7.1 input with up to 7.1 output. The input and output assignments are as described
in the below chart. You must make the correct connections from the surround processor output to the amplifier input
for the system to work correctly. Please refer to the connection diagram for more information.
The correct Synthesis Interconnect kit includes all the necessary connections for using the SDEC in the Synthesis sys-
tem. Please be sure to order the S3000IC for use with SDEC-3000 and S4000IC for use with SDEC-4000. Retrofit kits are
also available. Please contact JBL Synthesis Technical Support for more information at (888) 691-4171 (USA only).
C
ONNECTION
N
OTES
• Please follow the wiring diagram and the Input/Output Assignments chart for correct connections.
• You will need to use the Ethernet network port on the rear panel of the unit for the final calibration process.
You can use a crossover network cable if you plan to connect directly to the SDEC-3000 from a computer.
Alternatively, you can connect the SDEC-3000 through any standard Ethernet hub.
• When using the SDP-40 processor, make sure the subwoofer (in speaker setup) is set to Mono output and connect
to the Subwoofer Left output. Do not use the LFE output.
C
ONNECTING THE
S
PEAKER TO THE
R
EST OF
Y
OUR
S
YSTEM
S SD DEEC C--3 30 00 00 0 O Ouuttppuuttss ttoo A Am mpplliiffiieerrss
S S3 30 00 00 0IIC C
N Nuum mbbeerr C Chhaannnneell S SD DEEC C--3 30 00 00 0
9 LEFT FRONT C1
10 RIGHT FRONT C2
11 CENTER FRONT C3
12 LEFT SIDE C4
13 RIGHT SIDE D1
14 LEFT REAR D2
15 RIGHT REAR D3
16 SUBWOOFER D4
S Suurrrroouunndd P Prroocceessssoorr ttoo S SD DEEC C--3 30 00 00 0 IInnppuuttss
S S3 30 00 00 0IIC C
N Nuum mbbeerr C Chhaannnneell S SD DEEC C--3 30 00 00 0
1 LEFT FRONT A1
2 RIGHT FRONT A2
3 CENTER FRONT A3
4 LEFT SIDE A4
5 RIGHT SIDE B1
6 LEFT REAR B2
7 RIGHT REAR B3
8 SUBWOOFER B4
(Mono Sub Left)
13
NOTE: Place the SAM12x
passive crossover as close
to the speakers as possible.
The SAM12x has a single
speaker level input and multiple
outputs for the SAM1HF and
SAM2LF speaker modules.
SAM1HF, SAM2LF OM.qxp 4/24/07 9:40 AM Page 14