JBL PROCRISTAL UV-C 11W, Инструкция по эксплуатации

Страница: 17 / 116

11
The UVC water clarifier is generally installed at the water outlet of the pump. Hence when the
appliance is fitted in an aquarium, it is usually positioned
after water has flowed through the filter, and in the pond before water has flowed through the
filter. For this reason, newly established ponds should be allowed to run for 4 - 8 weeks without
a UVC water clarifier in order to allow sufficient cleansing bacteria to settle in the filter. An
inoculation of the filter material with JBL Filterstart Pond stimulates the rapid biological activity
and reduces the activation period.
Note on safety and operation check:
For your own safety, a safety switch is fitted in the electrical unit (2), which only allows the UVC
lamp to operate when the casing is closed. Never attempt to check the operation of the lamp by
switching the safety switch with the electrical unit open. This may result in damage to the eyes
and skin. The function of the burner can be checked through the viewing window (2 a).

Unpacking and setting up
Carefully remove the JBL PROCRISTAL UV-C Water Clarifier from the packaging, remove the
transport protection and check that the contents are complete.
In the event that anything is missing or damaged, please contact your specialist retailer.
Check that the voltage stated on the type plate of the electrical unit (2) corresponds to the
voltage available.
Saw off the enclosed stepped hose tails (6 and 7) to the required diameter. Grease them and the
flat seals (8) with some commercially available petroleum jelly (Vaseline). Mount the hose tails
together with the flat seals. Tighten the union nuts only by hand. Don’t use any tools.
Note: Alternatively to hoses, you also can use commercially available PVC fittings (1 ½“) with rigid
piping which can be connected to the threaded connection of the device.
 Putting the JBL PROCRISTAL UV-C Water Clarifier in place
Now you can place the UVC water clarifier at its intended installation position. Install the
lower part of the holder (1) with the 4 enclosed screws (1 b) at the intended place. Position
the appliance on the lower part and fix it by attaching the upper part (1 a) of the holder. The
threaded connection of the appliance can be installed either to the left or the right hand side of
the holder.
The JBL PROCRISTAL UV-C Water Clarifiers can be operated both in a vertical and a horizontal
position. The water inlet needs to be at the lateral connection piece (arrow marker).

Hose installation and putting the device into operation
Push the hoses onto the stepped hose tails and secure them with suitable hose clips. Put the
pump into operation and check that the appliance is watertight. Cut the hoses and lay them as
short as possible to avoid unnecessary bends.
Connect the JBL PROCRISTALL UV-C Water Clarifier to the mains. Now, when functioning
correctly, a light greenish bluish radiation can be seen though the viewing window at the
DE
UK
FR
NL
IT
SE
ES
PT
PL
CZ
RU
RO
TR
GR
CN