2
cOnnectIOnS
Power
Connector
Headphone
Connector
Auxiliary
Input
USB
Connector
1. If you are going to use your JBL OnBeat Rumble speaker dock with another audio
source, plug one end of a 3.5mm (1/8") stereo cable (not supplied) into the dock’s
Auxiliary Input connector, and plug the other end into the audio source’s audio-out or
headphone-out connector.
2. If you want to use headphones (such as when previewing mixes with a DJ app), plug
them into the dock’s Headphone connector.
3. Plug the dock’s power supply into the Power connector on the rear of the dock and
then into a working AC power outlet. The dock will automatically turn on and go into the
Bluetooth
®
pairing mode (the Source button LED will be flashing blue).
4. The USB port can be used for charging your iPod, iPhone or iPad device.
PLACEMENT
Place the JBL OnBeat Rumble speaker dock on a shelf or table with the rear of its enclosure
at least 3" (76mm) away from a wall or other surface to allow the bass ports to operate
properly.
CONTROLS AND INDICATORS
Bass Boost Button
and LED
Volume Down
Button
Volume Up
Button
Club EQ Button
and LED
Dock
Lid
Power Button
and LED
Source Button
and LED
