7
www.jbl.com
E
ng
lis
h
lIsTenInG TO MusIc
There are three ways to listen to music on your JBL On Tour iBT:
• Via
Bluetooth
technology from a
Bluetooth
-enabled device.
• Using the supplied Apple cable to connect an iPad, iPhone or iPod
device to the JBL On Tour iBT’s USB port.
• Using a stereo 3.5mm audio cable (not supplied) to connect an
audio device’s audio or headphone output to the JBL On Tour iBT’s
auxiliary 3.5mm mini jack.
To cycle through the sources, make sure the JBL On Tour iBT is not in
the
Bluetooth
call mode and momentarily press the Phone
“ ”
button.
Each press of the button changes to the next source. The source LED
will change color to indicate the active source:
White = Apple cable (USB port)
Blue =
Bluetooth
(wireless)
Green = Auxiliary 3.5mm mini jack
LISTENING TO MUSIC FROM A BLUETOOTH-ENABLED DEVICE
1. Make sure the JBL On Tour iBT system is paired with your
Bluetooth
-enabled device (see Bluetooth
Pairing
section, on page 5).
2. Press the JBL On Tour iBT’s Phone
“ ”
button until the Source
LED lights blue constantly. This indicates that the
Bluetooth
input is
selected.
3. Go to the
Bluetooth
-enabled device’s music player and play music.
Refer to the
Bluetooth
-enabled device’s user’s guide for directions
and details about using its music player and transmitting music via
Bluetooth
technology.
4. Use the
Bluetooth
-enabled device to control playback. Adjust the
volume using the “+” and “–” buttons located on the front of the
JBL On Tour iBT unit.
LISTENING TO MUSIC FROM A CONNECTED iPad, iPhone or iPod
DEVICE
1. Plug the supplied Apple cable into the JBL On Tour iBT’s USB port,
and plug your iPad, iPhone or iPod device to the cable’s 30-pin
connector.
2. Press the JBL On Tour iBT’s Phone
“ ”
button until the Source LED
lights white constantly. This indicates that the Apple cable (USB)
input is selected.
3. Use the iPad, iPhone or iPod device to control playback. Adjust the
volume using the “+” and “–” buttons located on the front of the
JBL On Tour iBT unit.
NOTE:
When the JBL On Tour iBT is running on AC power, it will
recharge the iPad, iPhone or iPod device while it is connected.
