background image

11

www.jbl.com

ENGLI

SH

symptom

possIble problem

solUtIon

note

There is distortion (static, crackling or 

hissing sounds).

The noise may be caused by interference from a 

monitor, cell phone or other transmitting device.

Turn the monitor or other device off to see if the noise 

is eliminated.
Move the JBL On Tour iBT cables farther away from the 

monitor or other device.

There is too much bass or treble.

The JBL On Tour iBT system is being overdriven by an 

amplified audio source.

Ensure that the JBL On Tour iBT system is connected to an 

appropriate source device.
Make sure that all signal cables are inserted snugly into 

their connectors.

The volume level may be too high.

Check the volume of the source device. Some devices 

will distort the output signal if the volume is set to 

maximum.

Check the EQ setting on your source device.

We recommend that the source device EQ be set to Flat 

or Off.

Your JBL On Tour iBT speaker emits a loud hum or 

buzzing noise.

The Aux In cable is not plugged in properly.

Check the Aux In cable connection

The speaker experiences radio frequency interference 

or picks up a radio station.

The input cable may be picking up interference.

Wrap up excess input cable in order to make it as short 

as possible.

When streaming music using 

Bluetooth

 technology, 

the sound from the JBL On Tour iBT speaker lacks stereo 

quality.

There is a 

Bluetooth

 compatibility issue between the 

JBL On Tour iBT unit and the source device.

Ensure that the source device has the latest software. 

 

Turn both the JBL On Tour iBT unit and the source device 

both off and on to reset them.

Some source devices have known functional 
issues with the JBL On Tour iBT system.

trouBleShootInG Sound QualIty (contInued)

0288CSK - JBL On Tour iBT v10.indd   11

06/05/11   13:31:07

Содержание On tour ibT















Отзывы: