Document Number: 950-0068-001
Description: MANUAL, JBL On Time Revision: 09
Page 3 of
4
9
Unpacking
Carefully unpack your speaker system and identify all components:
•
A On Time
•
B Power Supply
•
C iPod adaptors
•
D Aux audio cable
•
E AM antenna
General Setup
1)
Unpack the JBL On Time and iPod adaptors and power adaptor
2)
Choose the appropriate iPod adaptor and place into docking station
3)
Place the iPod into the adaptor
4)
Plug power adaptor into jack marked 15Vdc in
5)
Plug adaptor into wall outlet
6)
If an additional audio source is used, connect source into Aux In
7)
Unwind the FM wire antenna. Straighten the wire for the best reception
8)
Connect external AM Antenna for better reception
9)
If the use of an additional subwoofer is desired, connect to Sub Out jack
10) For backup memory settings, install 3 AAA batteries
Music Control Navigation
Alarm control
Clock Setting Instructions:
1)
From the
“PLEASE SET CLOCK SCREEN”
Press any Navigation key.
2)
Use “Left/Right” button
to set “hour” and press Enter
3)
Use “Left/Right” button
“minute” and press Enter
4)
Use “Left/Right” button
“day” and press Enter
5)
The JBL On Time will confirm the clock is set.
Timecrawler
– Auto time set
The JBL On Time features
TimeCrawler,
which can set the clock automatically. The On Time scans to find a radio station that transmits the time, receives the signal and sets the clock.
1)
Press the “Menu Up/Back” button
until you reach the “JBL On Time” screen
2)
Use “Left/Right” button
to select “Set” and press Enter
3)
Use “Left/Right” button
to “SetCLK” and press Enter
4)
Use “Left/Right” button
“Auto” and press Enter
The On Time will search for a radio station transmitting the time. When TimeCrawler finds a station, the On Time will display the % complete. The On Time will then show the time has
been set. If the On Time is not successful with Timecrawler, it will instruct you to set the time manually. Please follow the Clock Setting Instructions shown above.
*The accuracy of TimeCrawler is based on the accuracy of the local radio station clock.
Playing music
1)
Press “Mode Select” button
to select the source (iPod, Radio, Aux.)
2)
Press “+” button
to increase volume
3)
Press “-“ button
to decrease volume
Radio Tuning and Presets:
1)
Press the “Menu Up/Back” button
until you reach the “JBL On Time” screen
2)
Select “listen” and press Enter
3)
Select “radio” and press Enter
4)
Select “FM” or “AM” and press Enter
A
B
C
D
E
2
4
5
On/Off/Cancel
On/Off/Cancel