5
jbl on stage III
WM easy setup guide
read these instructions completely
or
Step 5. Place the appropriate “Walkman” attachment onto the JBL On
Stage III WM. Place your “Walkman” on the docking attachment or con-
nect an audio cable (not included) to the rear of the JBL On Stage III WM,
and connect the other end of the audio cable to the audio source.
Step 4. Connect the power adapter
into the input marked on the rear
of the JBL On Stage III WM; plug
the power adapter into a wall outlet
or power strip.
Step 7. Adjust the volume using
(+) to increase and (–) to decrease.
Press both to mute the JBL On
Stage III WM. Press either button
to unmute.
Step 1. Unpack the JBL On Stage III
WM, remote control attachmentsand
power adapter.
Step 2. Rotate the battery door to
the unlocked position to open the
battery compartment.
Step 3. Place 6 AA batteries in the
battery compartment. Batteries not
included.
Step 6. Press the Power button on
the back of the JBL On Stage III
WM. A green LED will light when
the JBL On Stage III WM system
is on.
— +
HOME
BACK
OPTION
PWR OFF
English
