3
12
i-Pod Operation (i-Pod purchased separately)
6
15 7
9
10
4
14
8
2
INT
PWR
TUN
MOD
HI-POWER 4x45 Watts
COMPACT DISC PLAYER
1
us
p h
L
S
O
E
V
L
3
RPT
4
RDM
5
6
2
INT
MR-165
AUX
0.LD
9.A.PS
BD.FN
8.DIS
7
SCN
MUTE
R
S
.
H
S
h
s
u
P
Important Notes
Prior to the final installation, perform a sound check. If high distortion or intermittent sound is
experienced, it is possible that the wiring from the CD receiver to the Vehicle’s electrical system
is poor or that the battery needs recharging.
If the battery and its charging circuit are OK, then rewire the red fused wire of the CD player
directly to the positive terminal (+) of the Vehicle battery.
Marine accessory shops stock the connector blocks and the 10 Amp cable which may be
necessary for extending the fuse wire connection.
1. Grounding
Make sure that the black wire on the wiring harness is connected to a good ground point on the
Vehicle. If the chassis of the Vehicle is used as a grounding point, make sure that the surface is
scraped clean from the metal before attaching the wire to it.
It is preferable to connect the black ground wire directly to negative terminal (-) of the Vehicle
battery.
2. Warning: polarity...
This model is only suitable for use in Vehicles which have a negative ground system,
e. g.. : the negative terminal of the Vehicle battery is connected to the chassis.
3. Connecting the speakers and power cables
Before you wire your system, disconnect your Vehicle battery's positive (+) cable. This helps
prevent damage in case of a short. When you complete the wiring, reconnect the battery cable
and test your marine stereo. When connecting your marine stereo's black ground wire, be sure
to connect the wire to a metal part of your Vehicle or preferably to the negative (-) terminal of
the Vehicle battery.
4. Reset Function
A microprocessor reset function has been provided to facilitate manual resetting of the internal
microprocessor. If you are faced with a malfunction during the operation, press and hold MODE
and BD/FN button simultaneously for about 3 seconds to reset the unit.
Note:
It will be necessary to re-enter the radio preset memories and other personal settings as
these will have been erased when the microprocessor was reset. After resetting the player,
ensure all functions are operation correctly.
POSITIVE
CHASSIS
NEGATIVE
CHASSIS
1. i-Pod Operation
Press MOD button (4) to select i-Pod mode.
* An i-Pod must be connected, if you want to operate i-Pod function. The iPod icon would
display on LCD once an iPod is connected.
2. Play / Pause button (7)
Press this button to pause playing. Press this button again to resume play.
3
5. ID3 Display button (14)
While playing i-Pod, press the DIS button repeatedly to display the ID3 attributes in the following
order: TITLE --> ARTIST --> ALBUM --> CLOCK --> ELAPSE TIME --> TITLE
6. Track Seeking (6)
- To select the next track, press the TUNE up button once. When the final track is reached, play
will resume on track #1.
- To select the previous track, press the TUNE down button.
Note: The current track will revert to the beginning when you press the tune down button once.
If you want to select the previous track, press the button once again within 2 seconds.
- To fast forward through tracks: press and hold the tune up button.
- To rewind the current track: press and hold the tune down button.
7. A.PS button (15)
Briefly press A.PS button to display MUSIC first and then scroll Playlist. Rotate VOL knob to
select from Artists, Albums, Generes, Songs, Composers, Audio- books, Podcasts, ets,
. Repeat play button (9)
Press the RPT button to hear the current track play repeatedly.
Press the RPT button again to return to norma play.
4. Random play button (10)
Press the RDM button to play all tracks (within the current playlist) in random sequence.
Press the RDM button again to return to normal play.
and press
the BD/FN button to acknowledge. Once again, rotate VOL +/- to choose from the available
tracks and press the BD/FN button to begin playing the selected track.
Note: In some cases, or if available, it will be necessary to choose from sub-directories, i.e.,
artist, album, etc., before finally selecting the desired track. Use the VOL knob to scroll through
the available sub-directories and acknowledge the the appropriate selection using the BD/FN
button. Repeat these steps until the desired track is finally available and use the BD/FN button
to begin playing.
