¦Ì
Quick Reference Guide for Sirius
13
1. To Access Satellite Radio
(perform one of the following)
-
Press MODE button until SIRIUS appears on the LCD.
- While in any mode other than SIRIUS, simply press SH.SR to enter SIRIUS mode.
2. For Direct Channel Entry
While in SIRIUS mode, press MODE button for over 1.5 seconds to enter Direct Mode. At that
point, the display will show "Channel_ _ _". Simply enter the desired number to go directly to
the channel (example: 123).
3. To Access SIRIUS ID number
In SIRIUS mode, press MODE button for over 1.5 seconds, "Channel_ _ _" will display on LCD,
enter "000" to display your SIRIUS ID number. "SID" followed by 12 digits will appear on the
LCD. Or simply navigate to channel "000" using the TUNE knob (15).
4. To Enter Category Mode
While in SIRIUS mode, press BD/FN button for over 1.5 seconds to enter Category mode.
The Category icon will appear on the LCD. Momentarily rotate Tune up/down button to switch
between category channel. To change categories, rotate and hold Tune up/down button for 1.5
seconds. To return to Direct mode, press and hold BD/FN button until the display says DIRECT.
5. To Preset Channels (up to 20 presets):
You can save up to 20 channels in the memory for direct mode and up to 10 channels in
category mode. There are two possible ways to preset:
- Press MODE button for over 1.5 seconds until "Channel_ _ _" displays on LCD. Then use
the numeral key to directly enter what ever channel you would like to store (example:104).
Press the preset button where you would like to store the channel for over 1.5 seconds to
save it to memory.
2. Use TUNE UP/DN button to find a channel you would like to store. Press the preset button
where you would like to store the channel for over 1.5 seconds to save it to memory.
6. To Display Song Title or Artist
In SIRIUS mode, press and hold SH.SR button for 1.5 seconds to switch between song title,
artist and composer on the display.
7. For Parental Lock Out Programming
- In SIRIUS mode, select the channel that you want to lock out. Press SH.SR to show SHIFT
icon, then simply press numeral 5 button. It has been locked when "Locked Channel" appears
on the display.
- To temporarily unlock a channel, manually tune to the channel. When prompted, the display
will read CHANNEL LOCKED, then it will display CODE. Enter your password and the channel
will be unlocked until you change to another channel.
- To permanently unlock a channel, after temporarily unlocking the channel press SH.SR
button to show SHIFT icon on LCD, then simply press numeral 5 button. Then enter your
password again, the channel becomes totally unlocked when "LOCK RELEASE" displays.
8. To Change the Password (CODE)
In SIRIUS mode, press and hold SEL button, then momentarily press SEL repeatedly until
CODE displays on LCD. Enter your current password first, once you see NEW CODE displays,
enter your new 4-digit password. Now display will show UPDATE which means the system
accepted your new password.
Note: If power is completely removed from stereo, the password will revert back to 0000.
