JBL K2 S9900, Комментарии к продукту и руководство пользователя

Страница: 36 / 43

Project K2 S9900
35
K2 S9900 is shipped with a twisted pair of shorting straps installed. In case the
bi-wire or bi-amp connection method is to be employed, remove the straps from
the terminals (referring to Figure 13) and retighten the terminals. If the ampli-
fiers are connected to the K2 S9900 loudspeakers in the bi-wire or bi-amp mode
with the shorting straps still on, the amplifier outputs will be shorted, which
could result in costly amplifier damage when power is switched on.
Final Checklist:
• Connect and plug in all other system electronics.
• Check all connections. In case of bi-amping or bi-wiring, make sure both
shorting straps are removed.
• Make sure the system orientation and HF/LF drive switching in the control
panel are correctly set.
The system is now ready for use. The K2 S9900 loudspeaker system is fully
functional as soon as it is set up. There may be subtle tonal changes in bass
output over the first week to 10 days of operation. These are caused as the
movement of the low-frequency drivers becomes more fluid and the parts settle
in. This process is completely normal and natural with transducers of this
caliber. Even during this initial period, there is no restriction on the amount of
amplification that may be applied. Enjoy!
Figure 13.
Autogoods “130”
130.com.ua