JBL Harman BAR 1300X, Руководство пользователя

Страница: 15 / 29

15 15
www.jbl.com
English
1) Calibrate the listening zone
L R
2
1-CALIBRATION
3
CALIBRATING
PRESS AGAIN TO CONFIRM
1-DONE
1. Place the detachable rear speakers beside your seating position.
• Make sure that the two detachable speakers have been
connected to the soundbar (See “ 6.1 Connect the
detachable rear speakers and subwoofer ”).
2. On the remote control, press CALIBR to start calibration.
J “1-CALIBRATION” is displayed on the soundbar.
3. When “PRESS AGAIN TO CONFIRM” is displayed, press
CALIBR again.
J Countdown starts from 5 to 1.
J
Calibration tone is heard. Audio calibration starts.
“CALIBRATING” : Calibration in progress
“1-DONE” : Calibration of the listening zone is
completed successfully.
6.2.2 Charge through a USB cable
100%
USB-C
*
• Use a USB-C cable to connect the detachable speakers to
power respectively.
• For the detachable speakers, the status indicator is used
for status indication of both battery power and wireless
connection (See “
3.2 Detachable speakers ”).
NOTES:
– * The USB-C cable is sold separately.
6.3 3D surround sound
6.3.1 Sound calibration
Optimize your 3D surround sound experience for your unique
listening environment.
For sound calibration, do the following:
• Make sure that your room is quiet;
• Make sure that the soundbar and the two detachable rear
speakers are fully in sight of each other, without obstacles
in between.
• Make sure that the left and right rear speakers are properly
placed, the L speaker on the left and the R speaker on the
right.