ES150PW
ES250PW
Frequency Response
27Hz – 150Hz
25Hz – 150Hz
Amplifier RMS Power
300 Watts
400 Watts
Amplifier Peak Dynamic Power
†
500 Watts
700 Watts
Crossover Frequencies
50Hz – 150Hz; 24dB/octave,
50Hz – 150Hz; 24dB/octave,
continuously adjustable
continuously adjustable
when activated
when activated
Driver
10" (250mm) PolyPlas
™
12" (300mm) PolyPlas
™
Operating Range
Up to 75' (22m), depending upon conditions
Up to 75' (22m), depending upon conditions
RF Operating Frequency
2.4GHz
2.4GHz
Subwoofer Dimensions
18" x 13-1/4" x 16-1/8"
19-3/4" x 15-3/4" x 17-7/8"
(H x W x D)
(457mm x 337mm x 409mm)
(502mm x 400mm x 454mm)
Transmitter Dimensions
3-3/4" x 4-7/8" x 3-15/16"
3-3/4" x 4-7/8" x 3-15/16"
(H x W x D)
(95mm x 124mm x 100mm)
(95mm x 124mm x 100mm)
Subwoofer Weight
39 lb (17.7kg)
43 lb (19.5kg)
Transmitter Weight
0.5 lb (0.2kg)
0.5 lb (0.2kg)
†
The Peak Dynamic Power is measured by recording the highest center-to-peak
voltage measured across the output of a resistive load equal to minimum impedance
of the transducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off.
SPECIFICATIONS
MAINTENANCE AND SERVICE
The enclosure may be cleaned using a soft cloth to remove fingerprints or
to wipe off dust.
The grille may be gently vacuumed. Stains may be removed with an aerosol
cleaner, following its instructions. Do not use any solvents on the grille.
All wiring connections should be inspected and cleaned or remade periodically.
The frequency of maintenance depends on the metals involved in the connections,
atmospheric conditions and other factors, but once per year is the minimum.
In the event that your subwoofer ever needs service, contact your local JBL dealer,
or visit www.jbl.com for a service center near you.
JBLP2706_ES150-250PW-120om 5/20/08 4:15 PM Page 7
