9
Getting Acquainted with the EON208P Powered Mixer
This part of the EON208P system houses the mixing board and power amplifier. You will connect all of the
microphones, musical instruments, Bluetooth
®
audio device, external sound sources (like MP3 or CD players),
in addition to any recording devices or additional speakers like a personal monitor, subwoofer or "Front of
House" feed.
The Basics
The mixing board is actually a very simple device. A "mixing board" brings audio sources "in" (through
the inputs) and routes the signal to the outputs (MASTER VOLUME/SPEAKER OUTPUTS or MONITOR
OUTPUTS). The mixer controls enable the user to affect the tone and/or volume in addition to routing the signal
and adding reverb to individual input sources.
Let's look at the "inputs" first:
AUDIO INPUTS
All of the inputs will route to the speakers and to the MONITOR OUTPUT SECTION.
MONO MIC/LINE INPUTS
Moving from left to right there are 4 identical input strips comprised of (from top to bottom) a treble control,
bass control, reverb control, reverb on/off button, volume control, mic/line selector and a XLR ¼"
combination connector.
BLUETOOTH INPUT
The EON208P comes equipped with the ability to stream Bluetooth audio.
To connect a Bluetooth device first press the "Bluetooth Pair" button on the
back of the device. Then select "EON208P" from the source device to
complete the pairing. Once paired, audio can be streamed from the
connected device.
