JBL DD66000CH-EVEREST II [DD66000CH], Руководство пользователя

Страница: 20 / 42

20
VI. Cut tapes at the corners of the bottom cardboard (drawing VI), slide the
loudspeaker system out toward you, together with bottom endpads
(drawing VI-2).
VII. Lift the system slightly on the right and left, in turn, to remove the bottom
endpads.
VIII. Remove the protective wrapping.
VI VI-2 VII VIII
Products are shipped with round-tipped spikes on the bottom of the cabinet. If
you would like to use pinpoint spikes, remove round-tipped spikes and replace
them with pinpoint spikes. In case they are hard to loosen, please use an 11/16-
inch (18mm) wrench.
Four metal coasters are also provided. These are to be placed between the foot
and the floor, should further protection of the floor coverings be required.
Grille Removal
The Everest DD66000 is shipped with its grille on the system. You can remove
the grille with the following procedures.
Step 1: Hold the lower parts of the grille with both hands and pull it up.
Step 2: Pull the grille toward you in order to take the grille out of the pins from
the cabinet.
Step 3: Pull the grille down and remove it from the enclosure.
Repeat the above procedures in reverse order in order to place the grille back
on the enclosure.