JBL CSR-V Скачать руководство пользователя страница 6

Страница: 6 / 8

Using the Remote Control

Source Selection

The Source Selection control on the remote control only functions when

the Source Selector knob for that zone is set to “REMOTE” on the mixer.

When the remote control is active, the green LED on the remote control

below the Source switch (labelled ACTIVE) lights. When this LED is not lit,

the remote source control is not operational.

Volume Control

The LEVEL on the mixer is ALWAYS operational, regardless whether the

Source Selector is active or not. This remote control is ATTENUATE ONLY.
To set the volume control of the remote control, you can follow the steps:

1. Turn the remote control LEVEL to maximum (full clockwise).
2. Set the volume control on the mixer to the loudest you will ever need

the system to be.

3. Turn the remote control LEVEL knob down to a comfortable or typical

operating level. Now the remote control volume control cannot turn

the volume up above what is set on the mixer.

Compatibility Between CSR Remote Control and CSM
Mixers

Remote Control

Mixer

CSM-21

CSM-32

CSR-V

√

CSR-2SV

√

CSR-3SV

√

* when using two input sources

Содержание CSR-V








