13
3.0 Operation
3.1 Precautions
Your amplifier is protected from internal and external faults, but you should still take the fol-
lowing precautions for optimum performance and safety:
1. Before use, your amplifier first must be configured for proper operation, including input
and output wiring hookup. Improper wiring can result in serious operating difficulties.
For information on wiring and configuration, please consult the Setup section of this
manual.
2. Use care when making connections, selecting signal sources and controlling the
output level.
3. Do not short the ground lead of an output cable to the input signal ground. This may
form a ground loop and cause oscillations.
4. WARNING: Never connect the output to a power supply, battery or power main. Electri-
cal shock may result.
5. Tampering with the circuitry, or making unauthorized circuit changes may be hazard-
ous and invalidates all agency listings.
6. Do not operate the amplifier with the red Clip LEDs constantly flashing.
7. Do not overdrive the mixer, which will cause clipped signal to be sent to the amplifier.
Such signals will be reproduced with extreme accuracy, and loudspeaker damage
may result.
8. Do not operate the amplifier with less than the rated load impedance. Due to the
amplifier’s output protection, such a configuration may result in premature clipping and
speaker damage.
9. Use the amplifier in a well-ventilated environment and do not use it at high operating
temperature. Failure of doing so will result in the auto disconnection from power supply
and the activation of over heat auto protection function. The power indicator will be
turned off, and nothing will be output from amplifier. In this case, turn down the volume
to the minimum, and the amplifier will resume working when the amplifier returns to
normal temperature. Turn the volume up to required level.
10. If the amplifier input voltage is too low, the low voltage protection function will be acti-
vated. The power indicator will be turned off.
CAUTION: JBL is not liable for damage that results from overdriving other system
components.
Содержание CSA-2120
