EN
WIRING FOR AUDIO OUTPUT
One subwoofer ( 4ohm/2ohm )
Subwoofer
+ -
SUB
L
R
Two subwoofers ( 4ohm )
Subwoofer
Subwoofer
+ -
+ -
SUB
L
R
CONNECTING THE REMOTE BASS
CONTROLLER
REMOTE
CONTROL
SETTING GAIN, CROSSOVERS, AND BASS
BOOST
Setting the gain
1.
Start with
control set to minimum,
and the crossover control rotated midway.
2.
Choose music with substantial bass
content.
3. Turn the volume control on your receiver to
¾ of its total output.
4.
Adjust the
control clockwise,
listening carefully to the bass output. If
you hear distortion, turn the
control
counterclockwise to decrease the gain.
Selecting the crossover frequency
Choose the crossover point to suit listening
preferences. Turn the dials to the left to lower
the crossover point and to the right to raise
the crossover point. Exact crossover settings
depend on your listening preferences.
Selecting the subwoofer phase
Switch the
back and forth to
determine which setting provides the most
clean bass output.
Selecting the bass boost
Adjust the
control clockwise or
counterclockwise to suit your taste.
SPECIFICATIONS
Club A600
Club A1000
Power output @ 4 ohms 350 watts RMS x 1 600 watts RMS x 1
Power output @ 2 ohms 600 watts RMS x 1
1000 watts RMS
x 1
Frequency response
10-320 Hz
10-320 Hz
Crossover frequencies
32-320 Hz variable,
12 dB/octave
32 -320 Hz variable
12 dB/Octave
Line-level input
sensitivity
200 mV rms -
2.0 V rms
200 mV rms -
2.0 V rms
High-level input
sensitivity
2V rms - 20V rms.
2V rms - 20V rms.
Signal-to-noise ratio
>80 dB
>80 dB
THD+N @ rated power
<1%
<1%
Fuse rating
30 A x 2
35 A x 3
Operating voltage
9~16 V
9~16 V
Dimensions (W x H x D)
8-11/16" x 2-1/16"
x 7-1/8" (220 mm x
51.3 mm x 180 mm)
12-5/8" x 2-1/16" x
7-1/8" (320 mm x
51.3 mm x 180 mm)
Weight
2.46 kg
3.52 kg
Recommended wire
gauge
8
4
