JBL BAR 5.0 MULTIBEAM, Руководство пользователя

Страница: 14 / 24

14 14
6. SETUP
6.1 Power-on/Auto standby/Auto wakeup
1
2
POWER
HELLO
LOAD STDBY
3
Switch on
1. Connect the soundbar to power by using the supplied power
cords.
→ The screen on the soundbar shows “ ” and then,
“ ”.
2. On the soundbar, press to switch on.
→
“ ” is displayed.
NOTES:
−
Use the supplied power cords only.
− Before switching on the soundbar, make sure that you have
completed all other connections (See
“5.1 Connection with your TV
and digital devices” in the “5. CONNECT” chapter).
Auto standby
If the soundbar is inactive for more than 10 minutes, it will switch
to standby mode automatically. “
” is displayed. Next time
you switch on the soundbar, it returns to the last selected source.
Auto wakeup
In standby mode, the soundbar will wake up automatically when
• the soundbar is connected to your TV through the HDMI
ARC/eARC connection and your TV is switched on;
• the soundbar is connected to your TV through an optical
cable and audio signals are detected from the optical cable;
• the soundbar is connected to your TV through the HDMI
ARC/eARC connection and through the HDMI connection, is
also connected to your digital device such as a set-top box,
DVD/Blu-ray player or game console, and your digital device
is switched on;
•
the soundbar is connected to your home network and audio
is streamed to the soundbar through Chromecast built-in,
AirPlay or Alexa Music.
6.2 Sound calibration
6.2.1 Automatic MultiBeam Calibration
With Automatic MultiBeam™ Calibration (AMC), your surround
sound experience can be optimized for your favorite seating
position.
• On the remote control, press and hold until
“ ” is displayed on the soundbar.
→
Countdown starts from 5 to 1.
→
Calibration tone is heard. Audio calibration starts.
“ ”: Calibration ongoing.
→
“ ”: Calibration completed successfully.
CALIBRATION DONE
>
5S
NOTES:
−
During AMC, all buttons on the remote control are disabled except
for and .
− “ ” is displayed if AMC failed.