JBL AVR480 Скачать руководство пользователя страница 13

Страница: 13 / 105

Status Button:

This button has no

function on the AVR480, but is used by
some DVD players and other devices to
access an on-screen menu system.

Input Selectors:

Pressing one of

these buttons will perform three actions
at the same time. First, if the AVR is not
turned on, this will power up the unit.
Next, it will select the source shown
on the button as the input to the AVR.
Finally, it will change the remote control
so that it controls the compatible product
selected. After pressing one of these but-
tons you must press the

AVR Selector

Button

again to operate the AVR’s

functions with the remote.

AVR Selector:

Pressing this button

will switch the remote so that it will oper-
ate the AVR’s functions. If the AVR is in the
Standby mode, it will also turn the AVR on.

Test Tone:

Press this button to

begin the sequence used to calibrate the
AVR480’s output levels (see page 22 for
more information on calibrating the
AVR480).

Sleep Button:

Press this button to

place the unit in the Sleep mode. After
the time shown in the display, the
AVR480 will automatically go into the
Standby mode. Each press of the button
changes the time until turn-off in the fol-
lowing order:

Hold the button pressed for two seconds
to turn off the Sleep mode setting. Note
that this button is also used to change
channels on your TV, VCR and SAT
receiver when selected.

Surround Mode Selector:

Press

this button to begin the process of chang-
ing the surround mode. After the button
has been pressed, use the

⁄

Buttons

to select the desired surround mode

(see page 28 for more information).

Repeat Button:

This button has

no function on the AVR480, but is used
by some CD and DVD players and other
devices to repeat play of program material.

Channel Select Button:

This button

is used to start the process of setting the
AVR480’s output levels with an external
source. Once this button is pressed, use the

⁄

Buttons

to select the channel

being adjusted, then press the

Set Button

, followed by the

⁄

Buttons

again, to change the level setting (see page
30 for more information).

⁄

Buttons:

These are naviga-

tional buttons. They will be used most
frequently to select a surround mode.
These buttons are also used to increase or
decrease output levels when configuring
the unit, to select speaker configuration
or to select the digital inputs. They are
also used to enter delay time settings
after the

Delay Button

has been

pressed.

‹›

Button:

These buttons do not

have a function with the AVR480. When
a DVD player or TV is selected, they may
be used to navigate the menus of those
devices.

Set Button:

This button is used to

enter settings into the AVR480’s memory.
It is also used in the setup procedures for
delay time, speaker configuration and
channel output level adjustment.

Digital Select Button:

Press this

button to assign one of the digital inputs

to a source. (See page 27 for more

information on using digital inputs.)

Numeric Keys:

These buttons serve

as a ten-button numeric keypad to enter
tuner preset positions. They are also used
to select channel numbers when a TV,
VCR or Sat receiver has been selected as
the input source, or to select track numbers
on a compatible CD, DVD or LD player.

Tuner Mode:

Press this button when

the tuner is in use to select between
automatic tuning and manual tuning.
When the button is pressed so that the

AUTO Indicator

goes out, pressing

the

Tuning Buttons

will move

the frequency up or down in single-step
increments. When the FM band is in
use and the

AUTO Indicator

is on,

pressing this button will change to
monaural reception, making even weak
stations audible (see page 31 for more
information).

Direct Button:

In Tuner mode, press

this button when the tuner is in use to
start the sequence for direct entry of a
station’s frequency. After pressing the
button, simply press the proper

Numeric

Keys

to select a station (see page

31 for more information on the tuner).

Tuning Up/Down:

When the tuner is

in use, these buttons will tune up or down
through the selected frequency band. If the

Tuner Mode Button

has been

pressed so that the

AUTO Indicator

is lit, pressing either of the buttons will
cause the tuner to seek the next station
with acceptable signal strength for quality
reception. When the

AUTO Indicator

is NOT illuminated, pressing these buttons
will tune stations in single-step increments
(see page 31 for more information).

Night Mode:

Press this button to

activate the Night mode. This mode is
available only with Dolby Digital-encoded
digital sources, and it preserves dialogue
(center channel) intelligibility at low vol-
ume levels (see page 29 for more
information).

Subtitle On/Off Button:

This button

has no function on the AVR480, but is
used by some DVD players and other
devices to turn on or off on-screen
subtitles.

Transport Controls:

These buttons

do not have any functions for the AVR,
but they may be used for the forward/
reverse play operation of a wide variety
of compatible CD or DVD players, and
audio or videocassette recorders.

Track Skip Up/Down Buttons:

These buttons have no direct function
with the AVR480, but when used with a
compatibly programmed CD or DVD player,
they will change the track or chapter of
the disc currently being played.

min