JBL ATX10C Скачать руководство пользователя страница 3

3

near these heat-dissipation systems may
possibly affect the long term reliability of
both your amplifier and the objects placed
above it.
Do not place CDs, record jackets, owner’s
manuals or other paper on top of or
beneath the unit or in between products
containing amplifiers in a stack. This will
block the air flow, causing degraded per-
formance and a possible fire hazard.

20. Power Sources. 

This product should be

operated only from the type of power
source indicated on the marking label. If
you are not sure of the type of power sup-
ply to your home, consult your product
dealer or local power company. For prod-
ucts intended to operate from battery
power, or other sources, refer to the oper-
ating instructions.

21. Grounding or Polarization.

This product

may be equipped with a polarized alternat-
ing-current line plug (a plug having one
blade wider than the other). This plug will
fit into the power outlet only one way. This
is a safety feature. If you are unable to
insert the plug fully into the outlet, try
reversing the plug. If the plug should still
fail to fit, contact your electrician to
replace your obsolete outlet. 
Do not defeat the safety purpose of the
polarized plug.

22. Power-Cord Protection.

Power-supply

cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them, paying parti-
cular attention to cords at plugs, con-
venience receptacles, and the point where
they exit from the product. To avoid safety
hazards, use only the power cord supplied
with your unit. If a replacement cord is
used, make certain that it is of a similar
gauge. We do not recommend using exten-
sion cords with this product. As with all
electrical devices, do not run power cords
under rugs or carpets or place heavy
objects on power cords. Damaged power
cords should be replaced immediately, by a
qualified service technician, with cords
meeting factory specifications. When dis-
connecting the power cord from an AC
outlet, always pull the plug; never pull the
cord. 

23. Non-use Periods.

The power cord of

the product should be unplugged from the
outlet when left unused for long periods of
time.

24. Lightning.

For added protection for this

product during a lightning storm, or when it
is left unattended and unused for long peri-
ods of time, unplug it from the wall outlet
and disconnect the antenna or cable sys-
tem. This will prevent damage to the prod-
uct due to lightning and power-line surges.

25. Overloading.

Do not overload wall out-

lets, extension cords, or integral conven-
ience receptacles, as this can result in a
risk of fire or electric shock.

26. Damage Requiring Service.

Do not

attempt to service this product yourself, as
opening or removing covers may expose
you to dangerous voltage or other hazards.
Unplug this product from the wall outlet
and refer servicing to qualified service per-
sonnel under the following conditions:
a. The power-supply cord or the plug has

been damaged; or

b. Objects have fallen, or liquid has been

spilled into, the product; or

c. The product has been exposed to rain or

water; or

d. The product does not operate normally

when following the operating instruc-
tions. Adjust only those controls that are
covered by the operating instructions, as
an improper adjustment of other controls
may result in damage and will often
require extensive work by a qualified
technician to restore the product to its
normal operation; or

e. The product has been dropped, or the

enclosure damaged; or

f. The product does not appear to operate

normally or exhibits a marked change in
performance.

27. Object and Liquid Entry.

Never push

objects of any kind into this product
through openings, as they may touch dan-
gerous voltage points or short-out parts
that could result in a fire or electric shock.
Never spill liquid of any kind on the prod-
uct. The apparatus shall not be exposed to
dripping or splashing and no objects filled
with liquids, such as vases, shall be placed
on the apparatus.

28. Heat. 

The product should be situated

away from heat sources such as radiators,
heat registers, stoves or other products
(including amplifiers) that produce heat.
Avoid installation in extremely hot or cold
locations, in an area that is exposed to
direct sunlight or near heating equipment.
When positioning the product in its final
location, make certain that it has adequate
ventilation on all sides, as well as on the
top and bottom.

Declaration of Conformity

We, Harman Consumer International

2, route de Tours 
72500 Château-du-Loir
France

declare in own responsibility, that the product

described in this owner’s manual is in compli-

ance with technical standards:

EN 60065:1998

EN 55013/A14:1999

EN 55020/A14:1999

EN 61000-3-2/A14:2000

EN 61000-3-3/1.1995

EN 50081-1:1992

EN 50082-1:1992

Gary Mardell

JBL,

Harman Consumer International

France, 03/02

Содержание ATX10C











Отзывы: