JBL ATX 100S (220-240V) Скачать руководство пользователя страница 10

JBL Consumer Products

250 Crossways Park Drive, Woodbury, NY 11797

Europe: 2. Route de Tours, 72500 Château du Loir, France
www.jbl.com 

©2002 JBL, Incorporated. 

JBL is a registered trademark of JBL, Incorporated.

Part No.1111-ATXSERIES

Refinements may be made on occasion to existing products without notice, but will always meet or exceed original specifications unless
otherwise stated.
*Dolby and Pro Logic are trademarks of Dolby Laboratories. DTS

®

is a registered trademark of Digital Theater Systems, Inc.

ATX

20

30

40

Type:

2-way

3-way

3-way

Frequency Response:

75Hz–20kHz

55Hz–20kHz

55Hz–20kHz

Sensitivity (2.83V/1m):

86dB

88dB

89dB

Nominal Impedance:

6 Ohms

6 Ohms

6 Ohms

Power Handling Peak/Continuous:

100/60 Watts RMS

150/100 Watts RMS

200/160 Watts RMS

Recommended Amplifier Power*:

20 – 60 Watts

20 - 80 Watts

30 - 120 Watts

RMS per Channel

RMS per Channel

RMS per Channel

Crossover Frequency:

4000Hz

800/3500Hz

800/3500Hz

Connection:

Single wired with 5-way

Single wired with 5-way

Single wired with 5-way

binding posts

binding posts

binding posts

High Frequency Driver:

10mm Titanium Laminate 

10mm Titanium Laminate

10mm Titanium Laminate

Dome tweeter

Dome tweeter

Dome tweeter

Midrange Frequency Driver:

-

100mm Laminated 

100mm Laminated 

-

Paper Cone

Paper Cone

Low Frequency Driver:

165mm Laminated 

165mm Laminated

Two 165mm Laminated

Paper Cone

Paper Cone

Paper Cones

Finish:

Black Ash or Beech Vinyl Laminate with Dark Grey Grille

Dimensions (H x W x D):

350 x 202 x 237mm

865 x 202 x 286mm

865 x 202 x 286mm

Weight (per piece):

5kg

13.5kg

14.5kg

ATX

60

10C Center

100S Subwoofer

Type:

3-way

2-way

Active Subwoofer

Frequency Response:

50Hz–20kHz

80Hz–20kHz

45Hz–150Hz

Sensitivity (2.83V/1m):

89dB

86dB

-

Nominal Impedance:

6 Ohms

6 Ohms

-

Power Handling Peak/Continuous:

200/160 Watts RMS

100/60 Watts RMS

-

Recommended Amplifier Power*:

40 – 120 Watts

20 – 60 Watts

100 Watts

RMS per Channel

RMS per Channel

RMS (1% THD)

Crossover Frequency:

800/3500Hz

3500Hz

-

Connection:

Single wired with 5-way 

Single wired with 5-way

5-way binding posts

binding posts

binding posts

Stereo in (RCA Phono)
LFE in (RCA Phono)

High Frequency Driver:

10mm Titanium Laminate 

10mm Titanium Laminate

-

Dome tweeter

Dome tweeter

Midrange Frequency Driver:

100mm Laminated 

-

-

Paper Cone

-

Low Frequency Driver:

250mm Laminated 

Two 100mm Laminated Paper

200mm Laminated

Paper Cone

Cones, Magnetically Shielded Paper Cone

Finish:

Black Ash or Beech Vinyl Laminate with Dark Grey Grille

Dimensions (H x W x D):

950 x 286 x 315mm

158 x 410 x131mm

350 x 295 x 350mm

Weight (per piece):

20kg

3kg

13kg

*Recommended Amplifier range is provided as a guideline only. Use of underpowered amplifiers may result in damage to the loudspeakers.

ATX20/30/40/60/10C/100S (230V)

ATX Series

O W N E R ’ S   G U I D E

PRODUCT LINE: 

DESIGN GOAL:

Bring the thrill of live performance and movie sound to the

home environment by calling on JBL’s professional engineering leadership.

PROFESSIONAL REFERENCE:

Home Loudspeaker Series

MODEL
NUMBER:

P R O   S O U N D  
C O M E S   H O M E

SPECIFICATIONS 

Содержание ATX 100S (220-240V)











Отзывы: