JBL Arena 180 Скачать руководство пользователя страница 3

www.jbl.com

2

ENG

LI

SH

ARENA 180/170/130/120 – LEFT AND RIGHT CHANNELS

For best results, place the speakers 6 – 10 feet (1.8m – 3m) apart. Angling the speakers toward the listening position can 
improve the stereo imaging. The speakers will produce the most accurate stereo soundstage when the angle between 
the listener and the speakers is between 40 and 60 degrees. 

Use the included carpet spikes for stability if you are placing your Arena 180/170 speakers on a thick rug or plush 
carpeting. The carpet spikes can be manually screwed into each rubber foot on the base of the speaker.

CAUTION: Floorstanding (tower) loudspeakers have a high center of gravity and may become unstable 

and tip over during earthquakes or if they are rocked, tipped or improperly positioned. Consider anchoring 

these speakers to the wall behind them, using the procedures and hardware customary for anchoring 

bookcases and wall units. You are responsible for proper installation and proper selection of hardware.

Generally, bass output will increase as the speaker is moved 
closer to a wall or corner.

For best performance, we recommend that you place the 
speakers at least 20 inches (51cm) away from the side walls.

PLACEMENT

  Position Arena 130/120 shelf speakers so that their tweeters 

are approximately at ear level. Peel off the adhesive backing 
and apply 4 rubber feet to the corners on the bottom of 
each speaker.

 

Rubber

Feet

6 – 10 ft 

(1.8m – 3m)

40° – 60°

>20 in 

(>51cm)

WALL-MOUNTING THE ARENA 120

We have designed the Arena 120 speakers to mount directly 
onto a wall. Each speaker has two keyholes on the back and 
will require two 1-1/2” (38mm), #10 wood screws fastened 
to a wall stud. If a wall stud is unavailable, install an anchor 
appropriate for a 1-1/2”, #10 screw.
 
NOTE: You are responsible for the correct selection and use 
of mounting hardware (available through hardware stores) 
that will ensure the proper and safe wall-mounting of the 
speakers.

Keyholes

Rubber cushions

1)  Using the included wall template, mark the positions on 

the wall where you would like to place the mounting 
screws.

 
2)  Fasten two 1-1/2” (38mm), #10 wood screws to the wall 

using the markings from Step 1 as your guide. Leave an 
1/16” (1.59mm) space between the wall and screwhead. 
If a wall stud is not available, use an appropriate anchor.

 
3)  To protect wall, attach 4 rubber cushions (included) in 

suggested locations.

 
4)  Place the speaker on the wall by aligning the keyholes 

on the back of the speaker to the screwheads on the 
wall. 
Once positioned properly, the speaker should slide 
down slightly and become secure.

Отзывы: