background image

3

Section 1: 

Important Safety Instructions

 

 

1.    Read these instructions.

2.    Keep these instructions.

3.    Heed all warnings.

4.    Follow all instructions.

5.    Do not use this apparatus near water.

6.    Clean only with dry cloth.

7.    Do not block any ventilation openings. Install in  

accordance with manufacturer’s instructions.

8.    Do not install near any heat sources such as  

radiators, heat registers, stoves or other apparatus  
that produce heat.

9.    Do not defeat the safety purpose of the grounding type 

plug.  A polarized plug has two blades with one wider 
than the other.  A grounding type plug has two blades 
and a third grounding prong.  The wide blade or the third 
prong is provided for your safety. If the provided plug 
does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.

10.  Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacle and the 
point where the power cord connects to the apparatus.

11.  Only use attachments/accessories specified by  

the manufacturer.  

12.  Unplug this apparatus during lightning storms or  

when unused for long periods of time.

13.  Refer all servicing to qualified service personnel.  

Servicing is required when the apparatus has been  
damaged in any way, including: power-supply cord or 
plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate normally, 
or has been dropped.

14.  The appliance coupler of the power supply cord is used 

as the ultimate disconnect device from the mains. The 
appliance coupler shall remain readily operable. 

15.  The apparatus shall be connected to mains socket outlet 

with a protective earthing connection.

Any changes or modifications  not expressly approved 
by the party responsible for compliance could void the 
user's authority to operate the equipment.

This equipment has been tested and found to comply 
with the limits for a class B digital device, pursuant to 
part 15 of the FCC Rules. These limits are designed 
to provide reasonable protection against harmful 
interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy 
and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio 
communications. However, there  is no guarantee that 
interference will not occur in a particular installation.  
If this equipment does cause harmful interference to 
radio or television reception, which can be determined 
by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one  
or more of the following measures:

  Reorient or relocate the receiving antenna.

  Increase the separation between the equipment  

    and receiver.

  Connect the equipment into an outlet on a circuit  

    different from that to which the receiver is connected.

  Consult the dealer or an experienced radio/ TV  

     technician for help.

Explanation of Graphic Symbols

The exclamation point within an equilateral 
triangle is intended to alert the users to 
the presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the product.

The lightning flash with the arrowhead symbol, 
within an equilateral triangle, is to alert the 
user to the presence of insulated “dangerous 
voltage” within the products enclosure that may 
be of sufficient magnitude to constitute a risk of 
electric shock to humans.

CAUTION:

 

TO REDUCE THE RISK  

OF ELECTRONIC SHOCK - DO NOT  
REMOVE COVER. NO USER SERVICEABLE 
PARTS INSIDE.  REFER SERVICING TO 
QUALIFIED PERSONNEL. DO NOT EXPOSE 
THIS APPARATUS TO RAIN OR MOISTURE.

WARNING:

  To reduce the risk of fire or electrical shock, do not  

    expose the apparatus to rain or moisture.

  The apparatus shall not be exposed to dripping or  

    splashing and no objects filled with liquids, such as vases,  
    shall be placed on the apparatus. As with any electronic  
    product, use care not to spill liquids into any part of the 
    system. Liquids can cause a failure and/or a fire hazard.

Содержание 705P























Отзывы: