StudiO MOnitOr MOdel
4312EBK
3
To ensure proper polarity, connect each “+” terminal on the back of the amplifier or receiver to the respective “+”
(
red
) terminal on each speaker. Connect the “–” (
black
) terminals in a similar way. See your receiver or amplifier’s
owner’s manual to confirm its connection procedures.
5. Basic Single-Wire Connection
Connect the amplifier to each speaker as shown in the
illustration on the right. You can use either set of terminals
on the speaker. NOTE: Do not remove the metal jumpers
from between the two sets of terminals when connecting the
speaker wires.
iMPoRtant:
Do not reverse polarities (i.e., “+” to “–” or “–”
to “+”) when making connections. Doing so will cause poor
stereo imaging and diminished bass performance.
The 4312EBK’s gold-plated speaker terminals can accept a variety of wire connector types: bare wire, spade
connectors, pin connectors and banana connectors.
using Bare Wire or Pin Connectors:
iMPoRtant:
Make sure that the (+) and (–) wires or pins do
not touch each other or the other terminal. Touching wires
can cause a short circuit that can damage your receiver or
amplifier.
using Spade Connectors:
iMPoRtant:
Make sure the (+) and (–) spade connector
blades do not touch each other or the other terminal.
Touching blades can cause a short circuit that can damage
your receiver or amplifier.
using Banana Connectors:
A. Unscrew
Cap
B. Insert Bare Wire or
Pin Connector through
Hole in Post
C. Tighten Cap to
Secure
A. Unscrew
Cap
B. Insert Spade
Connector Blades
around Post
C. Tighten Cap
A. Tighten
Cap
B. Insert Banana
Connector into Hole
in Cap
+ –
Receiver or Amplifier
(one channel shown)
Speaker
Connector Panel
0199CSK - JBL Model 4312EBK OM v4.indd 3
13/07/10 07:43:39
Содержание 4312EBK
Страница 5: ......
