manualshive.com logo in svg

JBL 300 Series, Руководство пользователя

Поделиться
Скачать
JBL 300 Series Скачать руководство пользователя страница 24

24

 

When completely new product groups or model numbers are introduced, JBL is in compliance with 

the EIA standard. When older products are modified with no change in the basic model number, or where new 
products will be required to interface with older ones, JBL usually maintains the negative convention to avoid 
confusion in the marketplace. In any event, all new positive convention products carry a legend to that effect next 
to their input terminals. Here is a breakdown of polarity conventions for JBL cinema product groups:

 

For maintaining absolute system polarity through the entire A- and B-chain of theater systems, we 

strongly recommend that polarity inversions, when they are required, are made at the input terminals to the screen 
loudspeakers. Making the change at any other point in the chain is likely to cause confusion.

B. Wiring Diagrams for 3000 Series Screen Systems:

 

Figure 33A shows proper amplifier/loudspeaker hookup for the models 3677 and 3678, both operating in 

a single-amplifier mode. The model 3678 is also configured to operate in biamplified mode, as shown at Figure 
33B. Note that this change requires removing four jumpers from the terminal strips of the dividing network.

C. Wiring diagrams for 4000 Series Screen Systems:

 

Figure 34A shows the correct method for wiring the components of the 4675C, and Figure 34B shows 

the correct method for wiring the 4670D. The 4675C-4(8)LF combination is always biamplified, either using the 
THX electronic dividing network or one of the input options on the power amplifier. The correct wiring, with polarity 
adjustment, is shown in Figure 34C.

Figure 33: Wiring diagrams for 3000 Series. Passive network operation (A); biamplified operation of 3678 (B).

3000-Series

All positive

4000-Series

4670D

Positive

4675C

Positive

4675C-4(8)LF

Negative

5000-Series

All negative

4600-Series subwoofers

All positive

Surround systems

All positive

ScreenArray systems

All positive

Содержание 300 Series















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды