ADDING A HEATER (not included)
If you wish to keep tropical (warm water) fish you will need a
submersible heater to maintain optimal water temperatures to
simulate their natural environment. Most tropical fish will need a
temperature range between 74-78 F for optimal living conditions.
A heater can be placed either in the main body of the Nano-
Cube behind accessories such as decorations, plants, or rocks.
You may also choose to place the heater in the rear chamber.
HIDING YOUR HEATER POWER CORD
Your canopy is installed with an extra black rubber grommet
with power cord slot in the rear of the canopy to secure the
power cord from cinching between the canopy and tank while
opening and closing.
Remove the black rubber grommet and insert heater power
cord. Gently squeeze the grommet back into the power cord
slot and adjust accordingly making sure to leave enough slack
for opening.
View from back of Canopy
Slide out from Canopy
6 Gallon Integrated Next Generation Flip Top Canopy Cree LED Lighting with Built in
Fans
While only concealing 6 LED’s of approximately 1.3 watts each (3: 10,000k and 3: 20,000k).
These high intensity bulbs put out more than 3 times the power of the older power compact
model (54 watts of output vs 18 watts with the assist of an integrated reflector) while still
remaining cool to the touch. This means less evaporation, and less chance for a catastrophic
salinity change if utilizing the nano cube for brackish or marine tanks. The canopy still houses
built in cooling fans that draw air out of the canopy to assist in dealing with heat generated by
the tanks, as well as managing moisture. The LED’s are not only more efficient but cost
saving as well, utilizing an electronic ballast and a lifespan of 50,000 hours before diminishing
in output compared to about 3,000 hours with a power compact system.
12 Gallon Integrated Next Generation Flip Top Canopy Cree LED Lighting with Built in
Fans
While only concealing 8 LED’s of approximately 1.3 watts each (3: 10,000k and 5: 20,000k).
These high intensity bulbs put out more than 3 times the power of the older power compact
model (144 watts of output vs 48 watts with the assist of an integrated reflector) while still
remaining cool to the touch. This means less evaporation, and less chance for a catostrophic
salinity change if utilizing the nano cube for brackish or marine tanks. The canopy still houses
built in cooling fans that draw air out of the canopy to assist in dealing with heat generated by
the tanks, as well as managing moisture. The LED’s are not only more efficient but cost
saving as well, utilizing an electronic ballast and a lifespan of 50,000 hours before diminishing
in output compared to about 3,000 hourswith a power compact system.
24 Gallon Integrated Next Generation Flip Top Canopy Cree LED Lighting with Built in
Fans
While only concealing 6 LED’s of approximately 1.3 watts each (5: 10,000k and 8: 20,000k).
These high intensity bulbs put out more than 3 times the power of the older power compact
model (216 watts of output watts vs 72 watts with the assist of an integrated reflector) while
still remaining cool to the touch. This means less evaporation, and less chance for a
catastrophic salinity change if utilizing the nano cube for brackish or marine tanks. The
canopy still houses built in cooling fans that draw air out of the canopy to assist in dealing with
heat generated by the tanks, as well as managing moisture. The LED’s are not only more
efficient but cost saving as well, utilizing an electronic ballast and a lifespan of 50,000 hours
before diminishing in output compared to about 3,000 hours with a power compact system.
17
18
