
10
Maintenance
Fuse
- Replace any defective or damaged pieces. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
Before carrying out maintenance or storage, always allow the equipment to cool and unplug the stand
from the station and the tool.
- Clean the station screen with a glass cleaner
or a damp cloth.
- Use a damp cloth to clean the casing, the
stand and the tool. Alcohol can only be
used for cleaning the metal parts.
- Periodically check that the metal parts of the
tool and stand are clean so that the station
can detect the tool status.
- Maintain tip surface clean in order to ensure a
correct stripped wire.
- Periodically check all cables.
- Replace a blown fuse as follows (see
specification chart) :
1.
take out the fuse holder and remove the
fuse. If necessary use a tool to lever it out.
2.
Press the new fuse into the fuse holder and
reinsert it in the station.
Clean
perodically
Stand
Ref. WSBT-B
Stand
Ref. WSST-A
Fuse
Fuse Holder
Fuse Holder