Choose the needle and the suction cup that best fits the component and start as follows:
Operation
1. Suction
2. Release
This tool helps you place and remove SMDs of any size easily thanks to the suction pump.
Pick & Place
(not supplied with TE)
Press the button to
start/stop the suction
Suction cups
Once the suction is
activated, cover the
pen hole with your
finger and lift off the
component.
Insert the needle with
the appropriate cup
for a correct suction
process.
Lift your finger to
release the component.
Make sure the needle
does not protrude
from the cup.
Pick & Place
Ref. T260-A
Straight Needles Set
Ref. 0901546
Bent Needles Set
Ref. 0861660
Maximum working temp: 250ºC (482ºF)
8
